Need advice adjusting my suspension

2 replies to this topic
  • Rettich333

Posted September 28, 2015 - 12:42 AM


Good morning Thumpers,


I need advice for adjusting my suspension.

I ride a 09 Yz450.

Suspension sag was adjusted correctly.

My problem nox is how to adjust the comp and rebound valves at my fork and in the back correctly.

What is stock setting ? How many clics in/out ? 

Could someone post his number of cliks he preferes to ride ?


regards from germany


Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Krannie McKranface

Posted September 28, 2015 - 05:19 AM


Suspension settings do not transfer well from one bike to another, because the oil wear and contamination differences changes the settings.


You can download a Service Manual from Yamaha's website, which will list the stock settings.

  • grayracer513

Posted September 28, 2015 - 06:53 AM


Another non-answer :rolleyes:


Standard Euro settings for the '09 YZ450 were as follows:


Rebound 12 out
Compression 12 out
Rebound 8 out
LS Compression 9 out
HS Compression 1 1/2 turns out
Start by running each adjuster in ("down", tighter) clockwise until it seats gently, then count clicks/turns back out.
Ten follow this basic guide to get started: http://api.viglink.c...ion Setup Guide

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.