Longer clutch cable ? 08 ' WR450F

3 replies to this topic
  • DPete

Posted August 30, 2015 - 11:45 AM


Is there one available? I am tall & already changed bar mounts and would like taller bars. The cable has no slack when turned left as it is, could use a 1" or 2" longer cable

  • Krannie McKranface

Posted August 30, 2015 - 12:24 PM


You just need to re-route the stock cable to the left.

I have 1.5" risers and tall bars, and it works fine.


Motion pro makes longer cables.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • DPete

Posted August 30, 2015 - 12:29 PM


Thanks, I'll take a look at going down the left side of the frame. What bars do you have?

Edited by DPete, August 30, 2015 - 12:35 PM.

  • JustG

Posted September 01, 2015 - 12:31 PM


I run the motion pro cable too, not the oem replacement but their own design. Perfect length with windam bend bars and 3/4" rise with stabilizer.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.