forks done!! Gold Valve!

3 replies to this topic
  • crazyadam

Posted February 25, 2002 - 04:07 AM


I am very happy with how the R.t. Gold valves went in. Just a few things that were not clear.... and MXTUNER solved all those problems! :)
Fork oil... is it measured from the very top of the outer tube? (I measured to the top... no springs.. w/ the guide in, and rod all the way down. I pulled the midvalve through its stroke 10 + times... and let it sit for 10 min. then sucked out the extra oil... to 95 mm below the top. they are all back together, and I'm a happy camper :D

AGAIN, I need to thank MXTUNER!!!


Posted February 25, 2002 - 09:01 AM


The oil is measured from the top of the inner tube. Shouldn't be too much of a difference though, a few millimeters at most.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • MX_Tuner

Posted February 25, 2002 - 02:13 PM


Well, how do they work?!?

  • crazyadam

Posted February 26, 2002 - 05:55 AM


THANK YOU!!!! They feel great!... but the shock is still out of the bike, so no test ride yet :)
the feel is so smooth... almost hydraulic! the springy bounce is gone!! I LOVE TECHNOLOGY!!

It was nice yesterday, and I HAD to ride, so out came the stock 98... and with a little work, off we went!! :D lots o' fun!!
but it was also torture, since I need to test the gold valves, and BK mod, new tires, and speedo. new steering stem bearings .....and so on (on my 2000) Oh well .. it snowing now.
I will report my happyness asap!!
and Thanks again.

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.