rear shock compatability



3 replies to this topic
  • SealClubber

Posted February 21, 2002 - 04:07 PM

#1

Anyone know if a 02 yz250f shock will fit on a 01wr426f and vice versa? How about a 01 WR426F shock and a 01 WR250F. This swap will save me a lot of money.

  • x400racer

Posted February 21, 2002 - 05:02 PM

#2

I think they will swap. I put a 00 yz426 shock on my 99wr400

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • SealClubber

Posted February 21, 2002 - 05:09 PM

#3

I read somewhere that the 02 shock is 5mm longer than the 01. My manual says that the 01 shock is 485.5mm long from hole to hole. Also, anyone have a 5.4kg spring they want to trade for a 5.0?

[ February 21, 2002: Message edited by: Dan Lawrence ]

  • sirthumpalot

Posted February 22, 2002 - 03:00 AM

#4

One thing to keep in mind is that it's likely the 250f and the WR426 shocks are sprung and valved differently. You may want to figure the cost of a spring and valve adjustment into the price of the 250f shock.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.