Anyone know if rad hoses off a 14 yz250f will fit on my yz450f


4 replies to this topic
  • yzUSMCf

Posted July 06, 2015 - 08:36 AM

#1

Have a oportunity to buy some moto hoses for cheep anyone know if they are interchangeable and will fit? Thanks


Both bikes are 2014

Edited by yzUSMCf, July 06, 2015 - 08:36 AM.


  • grayracer513

Posted July 06, 2015 - 08:56 AM

#2

Very unlikely.  Both the upper and lower  hoses are considerably different. 



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • yzUSMCf

Posted July 06, 2015 - 11:40 AM

#3

I was hoping they would be somewhat similar sence the bikes are almost the same . I looked at the oem part numbers and the only thing that is different is the first 3 letters of the PN the rest is the same..

  • grayracer513

Posted July 06, 2015 - 01:24 PM

#4

I looked at the oem part numbers and the only thing that is different is the first 3 letters of the PN the rest is the same..

 

That again.

 

Yamaha uses a "basic number" parts system.  The first three characters are the model the part was originally issued for.  5TA was the '03 YZ450, 2S2, the '06, 33D, the '10, and 1SL is the '14, as an example.  The trailing four characters, normally "00-00", are modifiers that indicate revisions, alternate sizes for things like jets or springs, stuff like that.

 

The second 5 characters are the basic number.  12180 is an exhaust cam, 16371 is a clutch boss.  For every model.  Only the numbers that precede or follow it mean anything, really.  A 1SL-11400-00-00 only differs by two numbers from a 1RC-11400-00-00, but one is a crankshaft for your bike, and the other is a crankshaft for an 850cc FZ-09 3 cylinder.

 

See the problem?



  • yzUSMCf

Posted July 06, 2015 - 01:30 PM

#5

That again.

Yamaha uses a "basic number" parts system. The first three characters are the model the part was originally issued for. 5TA was the '03 YZ450, 2S2, the '06, 33D, the '10, and 1SL is the '14, as an example. The trailing four characters, normally "00-00", are modifiers that indicate revisions, alternate sizes for things like jets or springs, stuff like that.

The second 5 characters are the basic number. 12180 is an exhaust cam, 16371 is a clutch boss. For every model. Only the numbers that precede or follow it mean anything, really. A 1SL-11400-00-00 only differs by two numbers from a 1RC-11400-00-00, but one is a crankshaft for your bike, and the other is a crankshaft for an 850cc FZ-09 3 cylinder.

See the problem?

yep! I figure you would be able to clarify thanks man!





Related Content

Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

YZ450FX OR YZ450F by MESSMAKER


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  30 replies
Forums
Photo

05 yz450f not fast enough by RedeyeYZ


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  38 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.