Yamaha WR426 popping


2 replies to this topic
  • KOCONUT

Posted June 21, 2015 - 02:46 PM

#1

Hey guys, been riding for awhile and am close to getting this thing plated and maybe even sumo'd. Only have one issue, the exhaust is pretty damn loud and pops alot even after its warmed up. I don't think it's jetted too lean, if anything its prop a little too rich. I don't even need the choke to start it. Should I go through the carb again anyway? I have an older FMF Q series muffler on it and just repacked it but its still way loud and popping alot. Any suggestions are well appreciated.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Krannie McKranface

Posted June 21, 2015 - 03:44 PM

#2

Adjust your fuel screw out



  • grayracer513

Posted June 23, 2015 - 01:11 PM

#3

Before you go tweaking the carb at all, be sure the exhaust joints from the head back to the silencer are sealing adequately.  You start chasing an exhaust backfire around with the carb when it's really being caused by an air leak and you'll end up with a bike that runs dirty rich and pops anyway.






 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.