2014-15 cycra air box radiator shroud install


11 replies to this topic
  • 15thumper

Posted June 13, 2015 - 01:32 PM

#1

Ok who has done one? I got two bokts and 4 washeesw in kit how does the air box bolt on?? Stock has dust fasteners this kit came with nothing, am I suppose to use the stock fasteners or buy something? ?

  • 03yzf450-kuke

Posted June 13, 2015 - 02:40 PM

#2

What is an air box radiator?

  • grayracer513

Posted June 14, 2015 - 04:28 PM

#3

What is an air box radiator?

 

country2.jpg?resize=400%2C266



  • 15thumper

Posted June 14, 2015 - 04:31 PM

#4

Radiator shrouds and air box cover

  • grayracer513

Posted June 15, 2015 - 07:02 AM

#5

What is an air box radiator?

 

I know that it wasn't punctuated the way it should have been (air box/radiator), but you do that all the time, too. 

 

On the '10 and later EFI models with the rear slanted cylinders, the radiator shrouds house the air box. 



  • 03yzf450-kuke

Posted June 15, 2015 - 08:22 AM

#6

I know that it wasn't punctuated the way it should have been (air box/radiator), but you do that all the time, too.

On the '10 and later EFI models with the rear slanted cylinders, the radiator shrouds house the air box.

lol i wasnt poking fun at anyones punctuation i was asking an honest question. No need to throw things in my face gray. Just wondering wat an air box radiator was.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • 03yzf450-kuke

Posted June 15, 2015 - 08:26 AM

#7

And it would be air box/radiator shrouds not just air box/radiator which would also mean nothing to me

  • ah665

Posted June 15, 2015 - 09:04 AM

#8

In the other thread for these, I may have cleared this up for you OP.



  • kvatland

Posted June 15, 2015 - 12:20 PM

#9

I have a 2015 model and i had to buy the 2014 OEM air box spring nuts and so 8mm bolts for mine to work 



  • ah665

Posted June 16, 2015 - 05:17 AM

#10

This is what is on the stock 15.

Silver%20Street%20Dzus%20-%20Bolt%20and%

 

To use the allen bolts that are supplied with the Cycra kit, you need to replace the 1/4 turn sleeve that comes on the 15 and buy a threaded sleeve (like the stock 2014). That sleeve will accept the flush-head allen bolt that came with your Cycra kit. Also, do not transfer the metal support ring from your stock shroud over to the Cycra shroud. It is not needed and the allen bolt will not fit through the hole. Hopefully ths clears up any confusion.



  • 15thumper

Posted June 16, 2015 - 06:11 AM

#11

Yeah talked to cycra yesterday and they said buy the 14 clips would have been nice to have instructions included in pack or to have known prior to purchase

  • ah665

Posted June 16, 2015 - 06:20 AM

#12

I agree. Mine didn't come with any instruction either. I was a bit confused at times.







Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.