Most noob question.


5 replies to this topic
  • Luv2brap-downunder

Posted May 22, 2015 - 02:12 AM

#1

I can't find the link in the chain to break it. Pretty sure it's stock. D.I.D
520

  • claybilly17

Posted May 22, 2015 - 03:05 AM

#2

Look on the tire side some times people put the on backwords

  • stevethe

Posted May 22, 2015 - 04:18 AM

#3

I can't find the link in the chain to break it. Pretty sure it's stock. D.I.D
520

 

The stock chains are rivet chains. Just buy a new Xring chain as the old one is a oring chain. You will also need a rivet installation tool.



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Krannie McKranface

Posted May 22, 2015 - 04:42 AM

#4

Grind two pins down flush with the plate

Using a Chain breaking tool, push the pin(s) until you can seaparate the chain

Installing the new chain, you will have to repeat this procedure to get the proper length

Use a master-clip type link to install the new chain



  • Luv2brap-downunder

Posted May 23, 2015 - 04:58 AM

#5

Will do, Cheers Steve

  • fixitandy

Posted May 23, 2015 - 06:44 AM

#6

Hi Steve, & also I like to spooge a little Sikaflex over the master link clip, for added insurance, cheers Andy.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.