***Used Stock Bearings***

2 replies to this topic
  • #1_Hit-man

Posted February 16, 2002 - 03:59 PM


Hey! Just had an idea "STAND BACK" Anyone have some stock bearings still laying around for the swingarm and linkage, from replacing with new ones? I will pay for the shipping to my address, if they are good needles(PLEASE! no bad ones). This would be great, will take that space up in the bearing case. Let me know, yz426f@msn.com ~Hitman~

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • txthumper

Posted February 16, 2002 - 05:16 PM


what are you gonna do with used bearings? :)

  • #1_Hit-man

Posted February 16, 2002 - 06:28 PM


Originally posted by txthumper:
what are you gonna do with used bearings? :D

Here this should answer your question.

#1 Hit-man
ThumperTalk Member
Member # 2506
posted February 16, 2002 05:34 PM

Originally posted by crazyadam:
Clean it all out and get some good moly grease! Mobil 1 is good. pack it in!

I am doing the same thing to my bike, that is greasing the bearings. The only problem is, I don't like the idea of taking that stuff out :)

If you take all that stuff out, the needle bearings will only cover half the space in the bearing case(That can not be good) :D

What is keeping the needle bearings from grouping together? Is there somewhere you can get just the needle bearings, so you can put a few more in? :D

This way you will have even distribution in the bearing case. :D I will be leaving my yellow crap in and add what grease I can get in. Unless I can find some extra needle bearing to put in the yellow craps place.

Looks like some are in a metal case to, are you tearing that out to? :D

Any help will be greatly appreciated, :D THANX! ~Hitman~

[ February 16, 2002: Message edited by: #1 Hit-man ]

Related Content


Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

First Hare scramble tips by dhend8

Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies

Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.