2013 Oil Drain Plug(s) Size? GYTR Mistake?

3 replies to this topic
  • Wiz636

Posted May 11, 2015 - 08:23 PM


Bought a Yamaha GYTR magnetic oil drain plug and was surprised to see that it is not the correct size. I confirmed the part # on the Yamaha website and the packaging even says it will fit the bike. Has anybody else had any issues with something like this?

image2.JPG image1.JPG

  • grayracer513

Posted May 11, 2015 - 09:13 PM


The '03 - '09 models used the bolt you have in the "oil tank" section, the front drain on the left.  The bigger, 10mm size goes in the rear drain for the sump/crankcase/trans.


Hardly ever see a mag drain in 8mm, but in truth, all the metal that gets shed goes in the sump, and most of it is from the gearbox, anyway, so the sump drain is really a more effective place to put it.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Wiz636

Posted May 12, 2015 - 02:21 PM


Both my sump and tank drain bolts are the same size so I guess Yamaha just dropped the ball on this particular GYTR part.

  • grayracer513

Posted May 12, 2015 - 02:47 PM


Somebody wasn't payin' attention.

Related Content


Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

James Stewart back on a YZ450F by YamaLink

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies

BIGBORE FOR YZ450F 2006? by Taattie94

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies

05 yz450f not fast enough by RedeyeYZ

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  38 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.