Pro Moto Billet spark arrestor for stock pipe??



3 replies to this topic
  • 426pete

Posted February 16, 2002 - 06:37 AM

#1

Hey guys, i have a 2001 426 with a stock pipe and an FMF pc4 but i need a spark arrestor. Today i am going to go out and buy a Titanium 4 from fmf but i saw that pro billet makes a slide in arrestor for the stock pipe. What do you guys think i should do, cause it's a 115 bucks for this way vs. 300 for the fmf. Any input would be greatly appreciated.
Brett

  • bbeakley

Posted February 16, 2002 - 08:42 AM

#2

If you have the FMF powercore IV squared, FMF makes a screen type spark arrestor end cap for like $40, that would be the cheapest option. I've seen the promotobillet unit at the local shop and it looks well made. I think I'd got that option before I bought another complete pipe.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • 426pete

Posted February 16, 2002 - 10:47 PM

#3

thanks, i don't have a squared so i can't insert another end cap, wish i did. I think i'll prolly go with the promoto cap. It looks like a pretty good deal. thanks again.
brett

  • SoCalWR426

Posted February 17, 2002 - 04:41 AM

#4

I use the Pro-Moto and really like it. Quality workmanship. Goes right into factory and replaces endcap. You will have to buy/borrow a rivet gun and they come with proper rivets. I highly recomend it.

SoCal





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.