Dragging front brake



1 reply to this topic
  • Robert_Adams

Posted February 13, 2002 - 03:47 PM

#1

The front caliper on my friends 01 keeps bending the caliper slider bolt causing the brake to drag. He also put on the larger rotor.

It wouldn't be so bad but we can't get spare bolts. The dealer says only one of them is available and that isn't the one that bends.

Right now we take it off, put it in a lathe and tap it until it's true again. We did finally make a spare so they could be swapped out.

Are we the only ones with this problem, If not where can we buy better pins. Any thoughts.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • scottzx7rr

Posted February 13, 2002 - 05:28 PM

#2

There was a few replies to your orginal post regarding this, With DaveJ saying the best answer to the issue or not riding the bike till fixed.

See your orginal post

http://www.thumperta...ic&f=6&t=004259





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.