Ready to chew on my chain. Help please!!!!



No replies to this topic
  • REMOTARD

Posted February 15, 2004 - 10:22 AM

#1

I have my Xr650L back together. Its really an NX with a 97 XRL motor. I have Yosh pipe and am running a dynojet kit with a 165 main 60 idle and dynojet needle on the third clip. Also have K N filter and open airbox. I have two questions. There are two vacuum lines for the AICV the one near the intake manifold and the other one near the throttle linkage side of the carb (not sure what its for it attaches to small cover that held on with two screws) anyway do I plug these? Run one to the other? Or what? Secondly, I am at about sea level or slightly above and the thing won't stay at an even idle. It also seems to crap out at higher rpms.It runs fine everywhere else. Also the problem seesm to get worse as it warms up. I would be ever so grateful for any help I could get. My frustration level has hit an all time high..Thansk in advance for taking the time to help!!!





Related Content

Wiki
Want to add a kickstart to your XR650L?  Here's how - last post by clc3251

Want to add a kickstart to your XR650L? Here's how


Articles
  • 0 replies
Reviews

Honda XR650L 2017 by Chris.GVS


Honda XR650L 2017
  • - - - - -
  • 0 reviews
Forums
Photo

Fell Off Trailer by usafxr


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  43 replies
Reviews

Honda XR650L 2016 by Chris.GVS


Honda XR650L 2016
  • - - - - -
  • 0 reviews
Forums
Photo

Post Apocalypse, ThumperTalk style! by Justin Pearson


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  35 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.