Actuator Arm

2 replies to this topic
  • h_bomb

Posted February 12, 2002 - 01:22 PM


How do you get it out.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • bbeakley

Posted February 12, 2002 - 01:58 PM


I tried just removing the little spring and black plate but it would only come up a little ways then stop. It felt like it was catching on something. I just looked on and they don't show a clip on the rod, but maybe the pushrod has to come out before it will slide all the way out (unfortunately that means taking the clutch cover and pressure plate off the other side).

  • Dan_YZF

Posted February 12, 2002 - 03:19 PM


Yes Bbeakley, you're right...

you'll have to remove clutch cover, springs, pressure plate and pushrod outfit to remove actuator arm....


Related Content


Should I buy this bike? help....... by Numsa Hul

Dirt Bike   General Dirt Bike Forums   What bike should I buy?
  • * * * * *
  • 10 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

The "going back to the other darkside" adventure... by Monk

Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies

BIGBORE FOR YZ450F 2006? by Taattie94

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 3 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.