Carb leaking...stuck float?


1 reply to this topic
  • BlueBeast400

Posted April 03, 2015 - 10:09 PM

#1

I removed the carb off my wr400 and put in some new jets. When I installed it and turned on the gas fuel started dumping from the drain hoses. Can new jets cause this or is probably the float? Any suggestions on where to start?



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Krannie McKranface

Posted April 04, 2015 - 05:19 AM

#2

Where to start?

Pull the float bowl cover and look at it.... :facepalm:

 

You may have let the float pin slip out, or you might have a corroded float needle and cavity






 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.