suspension setup


3 replies to this topic
  • adam080145

Posted February 23, 2015 - 05:35 AM

#1

Hey

I have started to set up my suspension on my wr450 in sm spec. I weigh 220lbs with gear.
I've upgraded the rear spring to a stiffer spring. The front is standard which I know isn't ideal.
Just after advice in clickers top and bottom and rear and front sag.

Cheers

Adam

  • Krannie McKranface

Posted February 23, 2015 - 07:02 AM

#2

It's not just 'not ideal', it's going to be a problem.

All the suspension action will shift to the front, causing loss of control.

You have to do them both at the same time.

Race Sag in the front should be 25-30% of the travel

Static/Race sag in the rear should be 25 / 100-105mm



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • adam080145

Posted February 23, 2015 - 11:12 AM

#3

so when i sit on it it should sag 100-105mm is that for road use with supermoto wheels?



  • Krannie McKranface

Posted February 23, 2015 - 02:37 PM

#4

Do a google search on 'setting sag'






 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.