2010 yz450f not starting

6 replies to this topic
  • jacobYz

Posted February 18, 2015 - 05:04 PM


At first it was dying in first and second with the clutch in. The next day it started and soon died. Now it won't start at all. I cleaned the air filter, and checked the spark plug. None to be the problem so far I was wondering if anyone had this problem with an EFI bike or had any suggestions.

  • billygildark5007

Posted February 19, 2015 - 06:24 PM


There could be several things causing this. Not all efi related.
Did you check your clutch has the correct free play?
Did you check the valves?
Get your hands on a tuner and check for any fault codes.

  • jacobYz

Posted February 19, 2015 - 06:26 PM


Yes about two mins ago I got a fault code 22 which if I'm not mistaken is a coolant sensor failure

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • billygildark5007

Posted February 19, 2015 - 06:37 PM


21 is coolant temp sensor 22 is iat (intake air temp)
It's on the right side of the throttle body above the tps

  • jacobYz

Posted February 19, 2015 - 06:40 PM



  • billygildark5007

Posted February 19, 2015 - 07:23 PM


Clean the connection and check the harness and ensure it's plugged all the way in. Clean the little hose and passageway. If that doesn't work replace it.

  • grayracer513

Posted February 19, 2015 - 08:07 PM


There are specific testing procedures for each sensor in the manual.  Have one?

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.