3mm Stroker on an 06 450

2 replies to this topic
  • Nathan Stiltner

Posted January 24, 2015 - 08:25 PM


Has anyone ran a 3mm stroker with a stock bore? Just got a bike in that was listed as a 502cc. Has 3mm stroker crank with a 97.54 bore, 12.5-1 HC Piston. Piston is cracked on the skirt and the cylinder has a crack from top to bottom. Bike came in overheating with water in the oil. Customer wants to go back with a stock cylinder. Is this feasible with the 3mill crank? Any input would be appreciated.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted January 25, 2015 - 07:11 AM


Yes, it's feasible.

  • Nathan Stiltner

Posted January 25, 2015 - 12:50 PM


Thank you v

Related Content


James Stewart back on a YZ450F by YamaLink

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies

Yamaha YZ450F 2017 by Chris.GVS

Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017

The "going back to the other darkside" adventure... by Monk

Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies

05 yz450f not fast enough by RedeyeYZ

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  38 replies

1998 yz400f will not idle. by trolley

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  32 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.