Triple Clamp torque specs ?

2 replies to this topic
  • DPW

Posted January 31, 2002 - 06:15 PM


I have a set of BRP top triple clamps on my YZF. I can't recall what the torque specs are for the two bolts that hold the bar mounts to the triple clamp,recommendations ?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Guest_Guest_*

Posted January 31, 2002 - 08:43 PM


I have a 99 400 and the "STOCK" 3clamp for the fork pinch bolts are.........
dont know if the same for aftermarket but they should be! :)

  • 426guy

Posted February 02, 2002 - 11:31 AM


The torque specs are 35ft lbs.......
17 ft lbs. for top triple clamp
14 ft. lbs. for bottom triple clamp
but for the 2 nut that hold the bar clamps to the triple clamp is 35ft lbs..

Related Content


Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

First Hare scramble tips by dhend8

Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies

yz400f throttle bog by yz400fmaniac

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • * * * * *
  • Hot  28 replies

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  57 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.