Head Pipe for 03 and 04 wr 450's



2 replies to this topic
  • RaphFoFiddy

Posted February 02, 2004 - 05:27 PM

#1

I've talked to alot of local guys and they have said one thing robbing power from the stock bikes is the stock pipe.
Has anyone put on any of the ugraded pipes with the stock exauhst? any difference?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Dez613

Posted February 03, 2004 - 02:28 AM

#2

I put the FMF powerbomb and TI 4 17" with the quite core and it made a small difference in the lower end, but jetting was a pain in the butt. I have just played with the stock stuff, haven't gone to a James Dean YET? and also FMF is supposed to be coming out with a dynojet kit specific for the WR cause the freakin' YZ kit doesmn't work on it. But I have a friend that put a big gun system on his 03 WR and he says it is great. anyway the biggest thing I liked over the stock vs the ti4 system is I saved 3 lbs. I did however use the stainlesss powerbomb for durability, or it would have been almost 4 lbs. I have heard of a lot of guys dinging up their ti headpipes very easily. :) :D

  • BEAN329

Posted February 03, 2004 - 09:30 PM

#3

Ditto on the dings in the head pipe. Looking very hard at the SS headpipe. :)




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.