04 WR450 Speedo/Odo drive eliminator?

6 replies to this topic
  • KerryT

Posted February 02, 2004 - 01:40 PM


Does anyone know where to get a 04 WR450 Speedo/Odo drive eliminator? It replaces the black piece that goes between the fork and hub where the odometer cable fits in. Enduro Engineering used to have them for the 400's but I don't see them for the WR450s


  • endurodog

Posted February 02, 2004 - 07:02 PM


I'll bump this cause I want to know also.

  • Dez613

Posted February 03, 2004 - 02:52 AM


I saw one just the other day and can't find it I will keep looking, but there is one being made, and it is tapered just like the rear spacers, very nice.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Machster

Posted February 03, 2004 - 05:25 AM


Barnums :) pro sports www.barnumspro.com makes one for the wr. I have one and it is great!

  • endurodog

Posted February 03, 2004 - 02:31 PM


Way kewl, I don't have time to look at this minute but will be ordering one later tonight!

  • MasiveMoe

Posted February 03, 2004 - 02:56 PM


I used a stock YZ450F spacer. You will need to replace(pivot works)the bearing on that side, as it(the stock one)is not sealed. Stock spacer from Yamaha is approx. $7.00.


  • AkRider

Posted February 04, 2004 - 08:27 PM


Flatlandracing.com makes one that I have on my 03. They also make great skid plates and radiator guards. :)


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.