Jump to content

Neutral Light on Cluster.


Recommended Posts

Hi again.

I need a little help. I installed a DID chain today because my bike needed a new one and once I installed it the neutral light stopped working. I checked all the fuses and they were not broken. I checked the neutral wire that runs down to the trans and that was fine. I checked the plug where the wires connect and that was fine.

The light worked last night and this morning I didn't come on. I tried to start my bike and it didn't want to crank over. I pushed the start button and nothing. I pulled in the clutch lever and it started to kick over.

I can post a video of that would help. Thank for the help.

Link to comment
Share on other sites

problem in the wire or nuetral switch down by the counter sprocket,,,,,too fishy that you were just in there and no have an issue,,probably pinched the wire causing an open..

B

I checked all over and the wire looks good. I'll post a picture when I get home.

Link to comment
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...