strip down

5 replies to this topic
  • rocky1980

Posted October 01, 2014 - 07:21 AM


hi guys i have just striped the head off my bike to put in a new piston kit. i noticed between the crank case and the barrel is a hole where coolant flows through and a dowel.

is there meant to be a rubber o ring around this dowel? i pulled off a lot of instant gasket and it looks like they should be a o ring there but i can't find it on any parts diagrams?





  • grayracer513

Posted October 01, 2014 - 07:37 AM


Judging by the looks of the case (because you failed to specify :naughty: ), that's an '06-'09 model, in which case, no, no O-ring at the cylinder base.

  • rocky1980

Posted October 01, 2014 - 07:38 AM


sorry grayracer mines a 2003 model thats just an image off the net to show the location.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted October 01, 2014 - 08:41 AM


That's different.  The '03-'05 calls for dowel number 5BE-12564-00-00, and O-ring number 93210-19758-00 (illustrated with the water pump in the catalog, and the same parts as used between the crankcase and right side cover).  Anytime an O-ring is used over a dowel like that there will be a machined recess to accept the ring.  If there isn't one (as in the picture you posted), one is not used.

  • rocky1980

Posted October 01, 2014 - 09:28 AM


ah brilliant thanks a lot grayracer that explains why i couldn't find it if its in the water pump section lol yea theres a little recess for it but i was confused as i thought it would be on the crankcase or cylinder diagram.

  • grayracer513

Posted October 01, 2014 - 09:44 AM


Well, yes, but that would have been intuitive [/sarcasm]

Related Content


Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride

Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F

Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies

Need help by Goforaride

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  68 replies

Thinking about Yamaha 250... by Arctic Pride

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.