2012 WR 450 Bark Busters / Hand guards

Control Handguards

25 replies to this topic
  • XMXZX

Posted September 09, 2014 - 06:04 AM

#1

I have read a few posts on here and it seems that everyone likes the Cyra pro bends.  I am going to order a set for my bike.  Not sure if I should get blue or white.  Does anyone have a pic with them installed on a 12 or newer?  I have the stock pro taper bars are they 7/8"?  Will the ones in the link below have everything I need to install them?  Thanks.

 

http://store.cycrara.../ceremo7ba.html

 

bike.JPG



  • revelc

Posted September 09, 2014 - 08:26 AM

#2

I think they are 1 1/8".
Great guards. My Zetas would have folded on some of the hits the Cycras take.

Edited for potato

2014 WRR R.I.Pieces
2012 WR450F ECU, GYTR tuner, Yoshi RS4, MSR rad guards, Cycra Pros, and a growing wish list...

Edited by revelc, September 09, 2014 - 10:28 AM.


  • torkd14

Posted September 09, 2014 - 08:42 AM

#3

Your stock bars are 1-1/8" I have a set of Cycra's on my 2012 and they're awesome. Tried Moose Racing ones and they fell apart in a hurry.

Attached Thumbnails

  • WR4501.JPG


  • KennyMc

Posted September 09, 2014 - 08:51 AM

#4

I like the triple clamp mounts as opposed the the typical "U" clamp mount. The ones that BRP make that replace the top bar clamps.

  • woods-rider

Posted September 09, 2014 - 09:17 AM

#5

I like the triple clamp mounts as opposed the the typical "U" clamp mount. The ones that BRP make that replace the top bar clamps.

 

And their threaded bar end inserts.



  • 080

Posted September 09, 2014 - 10:09 AM

#6

I like the triple clamp mounts as opposed the the typical "U" clamp mount. The ones that BRP make that replace the top bar clamps.


How did you make that work around the headlight/computer etc?

  • YamaLink

Posted September 09, 2014 - 12:15 PM

#7

Hard to go wrong with the Cycras. On so many WR450s in these neck of the woods.



  • KennyMc

Posted September 09, 2014 - 04:16 PM

#8

How did you make that work around the headlight/computer etc?

I actually have them on my 350EXC not on the WR as of now. There is no interference with the computer or headlight. I can take a picture of them on my bike if you would like.

ImageUploadedByThumper Talk1410308214.366908.jpg ImageUploadedByThumper Talk1410308214.366908.jpg

Edited by KennyMc, September 09, 2014 - 04:18 PM.


  • 080

Posted September 09, 2014 - 05:08 PM

#9

I actually have them on my 350EXC not on the WR as of now. There is no interference with the computer or headlight. I can take a picture of them on my bike if you would like.

attachicon.gifImageUploadedByThumper Talk1410308214.366908.jpgattachicon.gifImageUploadedByThumper Talk1410308214.366908.jpg

 

I haven't seen that style before, I thought you were referring to the ones that bolt to the triple clamp. I can see how those go around, thanks.



  • AtomicGeo

Posted September 09, 2014 - 05:54 PM

#10

These are white ones on my 2014:

 

WP_20140907_003_zps3031103d.jpg

 

 

 

WP_20140907_002_zpsc6d2199f.jpg



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • cubera

Posted September 09, 2014 - 06:11 PM

#11

Get some open ended DRC grips to go along with those wrap around guards. ;) 


Edited by cubera, September 09, 2014 - 06:34 PM.


  • KennyMc

Posted September 09, 2014 - 06:30 PM

#12

Get some open ended DRC grips to go along with those wrap around guards. ;) 

Can you type any smaller :p



  • cubera

Posted September 09, 2014 - 06:34 PM

#13

Can you type any smaller :p

LMAO. Fixed it fur ya. :devil:  :jawdrop:



  • KennyMc

Posted September 09, 2014 - 06:36 PM

#14

LMAO. Fixed it fur ya. :devil:  :jawdrop:

Getting old sucks :cry:



  • cubera

Posted September 09, 2014 - 06:46 PM

#15

Getting old sucks :cry:

Preachin' to the choir brutha!

  • XMXZX

Posted September 10, 2014 - 09:48 AM

#16

Thanks for all of the replies.  I am going to order them this week.  The ones I posted in the link above are universal and will fit my bike right?  1 1/8" bars.



  • KennyMc

Posted September 10, 2014 - 01:48 PM

#17

Thanks for all of the replies.  I am going to order them this week.  The ones I posted in the link above are universal and will fit my bike right?  1 1/8" bars.

I noticed the price for that setup is $133 but you will have an additional mount on your handlebars right next to the handlebar clamps.  I would recommend the following:

 

Get the handguards from here for $70.50

http://www.munnracing.com/    look under the CYCRA info.

 

 

Get the BRP handlebar clamps that replace the top clamps you currently have for $69.99 (they also have the handguards for $4 more so you may just want to get the whole deal here)

http://cyclebuy.com/...guard_alloy.htm   This way you are not adding any additional clamps to your handlebars.

 

That would be my suggestion, total cost only being ~$7 more but a "cleaner" setup :thumbsup:



  • XMXZX

Posted September 11, 2014 - 03:59 AM

#18

I noticed the price for that setup is $133 but you will have an additional mount on your handlebars right next to the handlebar clamps.  I would recommend the following:

 

Get the handguards from here for $70.50

http://www.munnracing.com/    look under the CYCRA info.

 

 

Get the BRP handlebar clamps that replace the top clamps you currently have for $69.99 (they also have the handguards for $4 more so you may just want to get the whole deal here)

http://cyclebuy.com/...guard_alloy.htm   This way you are not adding any additional clamps to your handlebars.

 

That would be my suggestion, total cost only being ~$7 more but a "cleaner" setup :thumbsup:

Kenny -

 

Going to order the setup you suggested.  I think I am just going to get everything from cyclebuy to save on shipping.  Thanks



  • KennyMc

Posted September 11, 2014 - 05:41 AM

#19

Kenny -

Going to order the setup you suggested. I think I am just going to get everything from cyclebuy to save on shipping. Thanks

They also have the threaded bar ends which I also use. Have them on both my bikes. Makes for a more solid application.

  • GP1K

Posted September 11, 2014 - 12:09 PM

#20

Another vote for Cycras. I have the triple clamp mounts on my WR, and the BRP top bar clamp/Scotts damper/bark buster mount on my KTM. Both work great, fit great and don't interfere with anything.







Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.