Still can't figure out what's wrong!

[AndrewAndrew213]

Hey guys a couple weeks ago I put a thread on here about my bike bogging and back firing, so I replaced the fuel pump and it seemed to help but it started happening again so I ran injector cleaner and it finally shut off and wouldn't start(I was in the woods quite far) so I replaced the injector still no luck, my timing is correct (I believe all the dots on the cams are where they say to be in the manual) when I replaced the injector it was hard to start but it did and would non stop backfire I have no idea what to do

[-texas2stroker-]

With the newer thumpers, you have to orient the cams as per the manual. THEN you have to do a pin count. You'll have to count the pins from one reference point to another. You'll find that in the manual. What are you working on?

[grayracer513]

THEN you have to do a pin count. You'll have to count the pins from one reference point to another. You'll find that in the manual.

 

You never have to do a pin count, and it's not in the manual that way.

 

Take the bike to a shop or find a buddy with the GYT-R tuner and interrogate the CDI for trouble codes to begin with.