210 60 hrs rebuild

[ehoward381]

Hi I ride a 2010 kxf250 just hit 60 hours it had a piston at 30hrs and iv shimmed valves twice last time one inlet was out but only just. My question is at these hours what do I need to change when I rebuild it it's had oil changed evry 4 hours and still starts and runs sweet

[Shawn250]

Hi I ride a 2010 kxf250 just hit 60 hours it had a piston at 30hrs and iv shimmed valves twice last time one inlet was out but only just. My question is at these hours what do I need to change when I rebuild it it's had oil changed evry 4 hours and still starts and runs sweet

I would replace the inlet valves and the piston and rings seeing that it will be open.

 

While open check for play on the conrod.

 

If you not racing the bottom end should still be good.