Nut on Triple Clamp



4 replies to this topic
  • DPW

Posted January 24, 2002 - 09:11 AM

#1

What size is the nut on the top of the triple clamp, 30mm ???

  • Guest_Guest_*

Posted January 24, 2002 - 09:27 AM

#2

It uses the Japanese wrench called the "fitall"
crecent wrench!!!! :)

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • motoman393

Posted January 24, 2002 - 09:39 AM

#3

yes it is 30mm

  • Shawn_Mc

Posted January 25, 2002 - 01:32 PM

#4

Remember to have at least one set of the pinch bolts loose, either tops or bottoms when sinch down the big stem nut on the triple clamp. The best way is acutally the bottoms that way the tops dont tend to twist while ya crank on it. :) now get like the red guy and git after it and get'r tight!

  • DPW

Posted January 25, 2002 - 03:33 PM

#5

Originally posted by Shawn Mc:
Remember to have at least one set of the pinch bolts loose, either tops or bottoms when sinch down the big stem nut on the triple clamp. The best way is acutally the bottoms that way the tops dont tend to twist while ya crank on it. :) now get like the red guy and git after it and get'r tight!


Good point Shawn, I'm glad you mentioned that.

Thumpin', I thought about the Japanese wrench , but that's one nut I want to make sure is torqued down.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.