2014 mapping data base why don't you guys post your maps so guys like me can get a baseline map?

Fuel & Air EFI Programmers

136 replies to this topic
  • YzCas

Posted August 22, 2014 - 07:33 AM

#1

Mapping data base why don't you guys post your maps to help others to get a baseline setup?

  • Bremer120

Posted August 22, 2014 - 01:35 PM

#2

I too am interested. MXA has a map as well as about 3 maps on the Yamaha site for stock motors with pump gas. It would be nice to get a collection of different maps from 14 and 15 owners with experience...

  • crf917rider

Posted August 22, 2014 - 01:57 PM

#3

ImageUploadedByThumper Talk1408744649.221106.jpg

  • crf917rider

Posted August 22, 2014 - 01:59 PM

#4

ImageUploadedByThumper Talk1408744692.275417.jpg

This is the mxa map but it makes the bike really soft down low i only use it on hard pack ,slick tracks

  • crf917rider

Posted August 22, 2014 - 02:01 PM

#5

ImageUploadedByThumper Talk1408744800.483960.jpg

This is my favorite map lots of usable power everywhere i tired aftermarket pipes but i like stock with this map the best

  • YzCas

Posted August 22, 2014 - 02:16 PM

#6

attachicon.gifImageUploadedByThumper Talk1408744800.483960.jpg

This is my favorite map lots of usable power everywhere i tired aftermarket pipes but i like stock with this map the best

Thanks for all you guys input lets keep them coming.

  • forgotmyusername

Posted August 23, 2014 - 07:58 PM

#7

Anyone have a suggestion for a map with a bit more bottom end? Stock motor with full FMF system.

  • YzCas

Posted August 26, 2014 - 03:42 AM

#8

Anyone have a suggestion for a map with a bit more bottom end? Stock motor with full FMF system.

I do believe what your lookiing for is posted above hopefully will get more posts.

  • forgotmyusername

Posted September 01, 2014 - 01:53 PM

#9

attachicon.gifImageUploadedByThumper Talk1408744649.221106.jpg


I tried the third map down and on hard pack it stinks. In low gears it just spins the rear tire...too much torque.

  • YZerman

Posted September 01, 2014 - 02:36 PM

#10

ImageUploadedByThumper Talk1408744692.275417.jpg

This is the mxa map but it makes the bike really soft down low i only use it on hard pack ,slick tracks


That's the map for the 450, did you use it on the 250 and that made it really soft down low?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • crf917rider

Posted September 01, 2014 - 02:38 PM

#11

That's the map for the 450, did you use it on the 250 and that made it really soft down low?

I have a 450 softens up the bottom to rich down low imho

  • YzCas

Posted September 03, 2014 - 05:10 AM

#12

Hey thanks guys keep the posts coming.

  • crf917rider

Posted September 03, 2014 - 09:50 AM

#13

That's the map for the 450, did you use it on the 250 and that made it really soft down low?

And this is the 450 forum ....... Just saying

  • YZerman

Posted September 03, 2014 - 09:54 AM

#14

And this is the 450 forum ....... Just saying


Thanks cranky, I originally thought it was in the 250 forum.

  • yukondood

Posted September 04, 2014 - 09:12 PM

#15

I have been messing with my maps and felt stock was best all around set up, I did not save the stock map in my programer.  Anyone know what the stock map is?

thanks



  • forgotmyusername

Posted September 04, 2014 - 09:15 PM

#16

All zeros

  • sesker15

Posted September 05, 2014 - 08:18 AM

#17

I think you guys should add what type of fuel you guys are using with these maps.



  • YzCas

Posted September 05, 2014 - 11:29 AM

#18

I think you guys should add what type of fuel you guys are using with these maps.

. Yes that's something we all over looked hopefully everyone is on pump I run av gas 100 octane.
I haven't had a chance to play with the tuner I'm in a cast with a broken foot. But very good suggestion.

  • Greg Pennsiltucky Lykens

Posted September 05, 2014 - 11:44 AM

#19

So far, I have not found a map I totally satisfied with. Sometimes the bike just overpowers the dirt on the start and I don't get a good start. Mostly a problem with a dry hard dirt start.

No problems with deep ripped tracks or concrete starts. Just dry dirt.

Otherwise, I like the mxa map, but it doesn't come off the line well. Actually, I haven't found one yet

  • forgotmyusername

Posted September 05, 2014 - 02:47 PM

#20

I'll be playing with a few maps this weekend with 100 octane. I'll post results.


Edited by forgotmyusername, September 05, 2014 - 02:48 PM.






Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.