Ring Gear Chipped



2 replies to this topic
  • G-Man

Posted January 23, 2002 - 07:51 AM

#1

My Clutch hub ring gear chipped a tooth, so I ordered an OEM (could not afford buying the Hinson AND the OEM as that is what you have to do, I found out!!). I also ordered the primary gear it connects to.

What I don't understand is why this clutch ring gear chipped, I flushed everything out the best I could.....

[ January 23, 2002: Message edited by: G-Man ]

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • sirthumpalot

Posted January 23, 2002 - 11:38 AM

#2

Better look closely to see if anything else is chipped to be sure that your ring gear didn't chip due to a piece of some other gear getting squeezed in there.

  • Boit

Posted January 24, 2002 - 10:28 PM

#3

G-Man; Is the Hinson hub setup like the basket where you would have to grind off the rivet heads to remove the gear and then bolt it to the new Hinson hub?

This IS an odd failure. Since these are fixed-mesh gears, it would appear to me that there may have been a casting flaw.





Related Content

Forums
Photo
Supercross

Wilson the Blue Privateer by jetfuel


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  50 replies
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.