Right Crankcase seals swap


No replies to this topic
  • RyGuy67

Posted August 02, 2014 - 08:35 AM

#1

Recently i had to replace the water pump seals inside the crankcase after i got it all put back together i noticed a smal crack in the bottom of the crankcase. long story short a buddy had a spare crankcase cover he gave to me but it didnt have any of the seals or orings or dowels in it so i have to swap mine from the old one. in that process this may sound dumb but this is the first time ive been inside of this crankcase i removed a seal and under it a sping and a little ball bearing and i was so focused on not losing that ball bearing on the ground that i didnt even realize which way the seal seats into the crankcase cover. the one side is flat with a metal ring near the inside of the seal and the other side is beveled in. which side of this seal faces the ball bearing?







Related Content

Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Forums
Photo

YZ450F 03 Sparks driving me crazy by SirAttard


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.