Wr426 spoke wrench size?


6 replies to this topic
  • 67imp

Posted July 12, 2014 - 03:33 PM

#1

Sorry , I have searched and searched for the size wrench that I may need?
Bueller, Bueller , Bueller,

  • MANIAC998

Posted July 14, 2014 - 02:06 AM

#2

It's a proprietary wrench, that Yamaha sends out with each bike. It says either 10 or 12 printed on it, but I don't believe that number corresponds with anything.



  • Krannie McKranface

Posted July 14, 2014 - 07:10 AM

#3

Most spoke wrenchs come doble sided with 10 mm and 12mm for front and rear spokes



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • 67imp

Posted July 14, 2014 - 01:57 PM

#4

Well I can guarantee you they are not 10 or 12 mm , they may have the 10 and 12 stamped on them but it is less than 7 mm as that is the smallest size I have and it is too big. I am just wanting to go and order the correct wrenches .

Edited by 67imp, July 14, 2014 - 02:00 PM.


  • Krannie McKranface

Posted July 14, 2014 - 02:30 PM

#5

10 mm spoke head, not wrench. 


Edited by Kah Ran Nee, July 14, 2014 - 02:33 PM.


  • 67imp

Posted July 14, 2014 - 06:30 PM

#6

Well I used the good old e bay search based On a wr426 apoke wrench and it appears that the front takes a 6.3 mm and the rear takes a 6.8 mm ?

  • MANIAC998

Posted July 16, 2014 - 02:18 AM

#7

Well I used the good old e bay search based On a wr426 apoke wrench and it appears that the front takes a 6.3 mm and the rear takes a 6.8 mm ?

That seems about right. Like I said, the numbers printed on the spoke wrench don't really correlate to anything, at least not to me.






 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.