ASV F3 front brake lever



2 replies to this topic
  • jasonl20069

Posted July 10, 2014 - 09:08 AM

#1

I brought new ASV F3 clutch and brake levers for my Yamaha WR450F 2014 which state bike specific.

Clutch instructions say you need to replace the perch but i had no problem fitting it to the oem perch,

The problem starts with the brake lever this does not fit the oem perch for the 2012-2014 model as the

master cylinder has been designed to work the brake switch, so for it to fit i will need to modify my self.[attachment=164925:2014-07-08 16.12.36.jpg][attachment=164926:2014-07-08 16.12.49.jpg][attachment=164927:2014-07-08 16.13.03.jpg][attachment=164928:2014-07-08 16.13.18.jpg]



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • GuyGraham

Posted July 10, 2014 - 10:31 AM

#2

just swap over to a hydraulic brake light switch so you haven't got to mod the lever



  • jasonl20069

Posted July 10, 2014 - 10:42 AM

#3

Thanks for the reply, i had the wr426f and i put a ktm hydraulic switch on it, so

that will be an option i will look at thanks again.






 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.