Need a little Help with 2014 WR 450


4 replies to this topic
  • mikenash

Posted July 08, 2014 - 07:57 PM

#1

Trying to figure out the throttle stop screw to take out if anyone has pictures that would be great as I have tried to youtube it and google images and I'm not having any luck. Thank You!!

  • mikenash

Posted July 09, 2014 - 06:09 AM

#2

Someone must have a picture or a video?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • MyersAvionics

Posted July 09, 2014 - 08:18 AM

#3

I don't have a picture, but i took mine out pretty easily after taking off the header pipe to be able to get my hands under the throttle body to remove the safety torx type screw. Took a good 5min or so. 



  • mikenash

Posted July 09, 2014 - 08:53 AM

#4

Ok so it took me a little bit, But it takes a torques security Not a regular torques. Thank You!

  • Spider-One

Posted July 09, 2014 - 10:44 AM

#5

I use some needle nose pliers. There wasn't any loctite so it came out easy, put the new one in with a small ratchet and the proper torx bit so space wasn't such an issue. Used some blue loctite and done.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.