YZ 450 2014 FORKS


No replies to this topic
  • Envisage

Posted July 06, 2014 - 05:26 AM

#1

Hi be keen from anyone with some experince/knowledge re this ?

 

I initially added 10ml of oil as apparantley it helps "keep the fork up in the plusher part of the stroke" which i was chasing, can anyone advise if it does ? as i didnt really feel this/notice it, other than noticing it made the last part of the stroke harsher

 

I then removed the 10ml, with no noticable improvement. Although maybe not quite the full amount. Ive read as little as 5ml can make a difference ?

 

It says lowering the fork oil amount can reduce the harshness in the final part of the stroke ?, can anyone whos done this advise if this was the case ?

 

Forks are standard, no revelaving standard oil etc.

 

Im mainly ride rough sand tracks & have been chasing a good sand settings







Related Content

Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.