Fine tuning


5 replies to this topic
  • jonesy383

Posted July 05, 2014 - 02:19 AM

#1

so ive just adjusted my valves now i cant get the bike to run right.. is it possible i need to change my jetting? the idle is up and down just cant get it right. cheers



  • Krannie McKranface

Posted July 05, 2014 - 04:59 AM

#2

http://www.thumperta...ew-and-jetting/

 

http://www.dirtrider...r_carb_rebuild/



  • Ron W

Posted July 05, 2014 - 08:35 PM

#3

How did it run before you adjusted the valves?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Krannie McKranface

Posted July 06, 2014 - 01:40 PM

#4

You probably damaged the hot start nut, and now you have an air leak



  • jonesy383

Posted July 07, 2014 - 01:51 AM

#5

its ran fine before i pulled it apart, where is this hot start nut?



  • Krannie McKranface

Posted July 07, 2014 - 04:50 AM

#6

It's above the choke

Follow the hot start cable to the carb






 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.