Jets and needle settings

2 replies to this topic
  • splynter

Posted May 30, 2014 - 09:45 PM


I live in AUSTRALIA, North Queensland, Cairns. I have a 2010 WR450F. Has anyone living in this region rejetted their carburettor? If so what jets did they replace and what sizes. Altitude range is from sea level to 2000-2500ft, most riding is done at sea level and occasionally up to specified altitude. If you know the tropics you will know the humidity and weather conditions. Thanks for any advice

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • RockerYZWR

Posted June 01, 2014 - 05:56 AM


Give the threads below a try, mate. You're in the YZ forum, which can provide a lot of good info for the WR as well, but the WR has it's very own section in which you'll find much more. Note that the YZ forum does have a jetting database at the top (in the "stickies"), which may also provide useful information to you. Good luck!

WR performance:

YZ jetting database:

  • grayracer513

Posted June 02, 2014 - 09:22 AM


The YZ jetting DB is probably not going to be particularly useful, since the WR runs a slightly different carb. 

Related Content


Yamaha YZ450F 2017 by Chris.GVS

Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On Yesterday, 06:20 PM

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride

Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies

James Stewart back on a YZ450F by YamaLink

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.