Clutch arm spring help

Yamaha YZ426F Engine Clutch & Components

2 replies to this topic
  • rustynail

Posted May 01, 2014 - 04:43 AM

#1

I have a YZ426f 2002 I removed my clutch arm to make it longer because the clutch was really stiff. Any how when I removed it I saw the return spring was like in pic 1. Pic 2 is the way I think it should go. What do guys think? Should the spring be in the notch or on the other side.

ImageUploadedByThumper Talk1398948114.915035.jpg ImageUploadedByThumper Talk1398948132.799860.jpg

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • NEKOOHC

Posted May 01, 2014 - 04:55 AM

#2

Set it so that as the arm is pulled the spring compresses .

  • grayracer513

Posted May 01, 2014 - 06:06 AM

#3

The spring should pull against the cable to return the lever to its normal at rest position.







Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.