What type LOCTITE do I use?



3 replies to this topic
  • YZ426guy

Posted January 16, 2004 - 07:19 AM

#1

I rcvd my parts today including the starter gear, new key, and starter clutch. What type of LOCTITE do I use? I know there are various strengths, some can be removed, others can't. ANy help would be appreciated.

  • BlueDragon

Posted January 16, 2004 - 10:16 AM

#2

Make sure it's removable. Some are permanent.

:)

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • jwriott

Posted January 16, 2004 - 10:17 AM

#3

Send me your e-mail address and I'll send you the service bulletin in .pdf format.

It says to use Loctite 648 in the bulleting.

  • faggio40

Posted January 16, 2004 - 02:47 PM

#4

Loctite 242, medium strenght.

bye




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.