Best 2012 throttle mod for jerky response?


9 replies to this topic
  • tomjoens

Posted April 09, 2014 - 07:31 AM

#1

What do you guys think? Throttle body mod by injection engineering, 4.4 oz flywheel, or gytr tuner?

Edited by tomjoens, April 09, 2014 - 07:31 AM.


  • grayracer513

Posted April 09, 2014 - 08:37 AM

#2

Of the three, the most effective to address that specific problem is the throttle body.



  • the go-devil

Posted April 09, 2014 - 09:59 AM

#3

I run the 4.4 oz flywheel and a G2ergo Dirt Tamer throttle and with great results. I don't get fatigued as easily with the Dirt Tamer installed. It works really good.

  • atf8611

Posted April 09, 2014 - 06:04 PM

#4

Injectioneering. I just had it done to my 2011. It's a night and day difference. The problem is in the throttle body. Anything else is just a band aid solution. It took care of 99% of the problem.

  • gofaster450

Posted April 10, 2014 - 02:31 AM

#5

Agree with atf8611. Injectioneering mod made the biggest difference. This combined with a flywheel weight is pure bliss. The G2 throttle tamer only made a small difference and after the above changes, have replaced it with the factory throttle tube.



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Gunner354

Posted April 10, 2014 - 08:41 PM

#6

Injectioneering. I just had it done to my 2011. It's a night and day difference. The problem is in the throttle body. Anything else is just a band aid solution. It took care of 99% of the problem.

What exactly do they modify and how

  • atf8611

Posted April 11, 2014 - 03:17 AM

#7

You can give the guy a call, he's more than willing to discuss the procedure. I don't remember exactly what the mod entails, but it certainly works.

  • grayracer513

Posted April 11, 2014 - 12:07 PM

#8

As I recall, the thrust of it is that the angle of the throttle plate in the fully closed position is changed physically, with necessary associated tweaks done along with that.  This alters the rate at which any certain amount of rotation increases the size of the air path during the first 5% of opening.



  • galligar

Posted April 11, 2014 - 01:59 PM

#9

1st thing I did on my 10,it works, you can play with maps, fly wheels,throttle tubes, the injectioneering mod is the cure,rode bikes with just the other mods not as good. It costs $200+ its the best fix.

  • FZ1426

Posted April 13, 2014 - 04:45 PM

#10

GYTR Tuner "less hit" map. Done deal.







Related Content

Forums
Photo

YZ450F 03 Sparks driving me crazy by SirAttard


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.