Help with clutch cable routing, did I get the wrong cable?


3 replies to this topic
  • DieselJoe

Posted March 21, 2014 - 08:42 AM

#1

Switching from a Magura hydraulic clutch to cable, so I don't know proper way to route it, it seems like my cable is too short because I it barely pull the clutch, not nearly enough for me to ride it, I'm thinking it might be because of how I have it routed but I don't know? Here are some pictures

t82sn8.jpg

  • DieselJoe

Posted March 21, 2014 - 08:45 AM

#2

x10sc6.jpg
4vkdpc.jpg

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted March 21, 2014 - 09:40 AM

#3

Yes you did get the wrong cable.  Your bike appears to be an '03, or a very early '04, by the looks of the cable anchor point.   You need a 5TA-26335-00-00.  You probably bought a 5UL-26335-00-00 instead.   The 5TA is distinguished by the curved cable guide at the transmission end. 

 

If you have trouble finding one, you may be able to use a cable for an '05 WR450 (PN 5TJ-26335-80-00), as the are routed and anchored in a very similar manner.



  • DieselJoe

Posted March 21, 2014 - 10:04 AM

#4

I guess you win some and you lose some on ebay, thanks for clarifying that for me





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.