GYTR Brush Guard Deflectors 2012 WR 450


4 replies to this topic
  • Andrew Puetz

Posted March 05, 2014 - 02:11 PM

#1

I purchased these online for my WR last year.  These are the GYTR guards.  Now I want to see if they have the plastic component for brush, that would bolt on to the pre-drilled holes, but I cant find even a photo of them.  Any ideas?

 

 

Attached Thumbnails

  • thumbnail.jpg


  • 080

Posted March 06, 2014 - 05:52 AM

#2

I purchased these online for my WR last year.  These are the GYTR guards.  Now I want to see if they have the plastic component for brush, that would bolt on to the pre-drilled holes, but I cant find even a photo of them.  Any ideas?

 

According to Yamaha's website they are Cycra's.

 https://www.yamahapa...ory_ss_facet=50



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Krannie McKranface

Posted March 06, 2014 - 06:19 AM

#3

That is a standard Cycra Pro-bend product.

 

http://store.cycrara...m/cypralha.html



  • Andrew Puetz

Posted March 06, 2014 - 06:54 AM

#4

Ok, thats what I thought... I was just thrown off as the photo shows 3 holes and my guards have 2 but I suppose they vary from model to model.  Thanks!!



  • Navaho6

Posted March 06, 2014 - 06:17 PM

#5

You can drill and tap any aluminum barkbuster to accept most shields.  I put the Cycra Series One plastic shields on some $40 barkbusters from Cyclegear - http://www.cyclegear...s/p/41399_37926  Better than ProBends because they don't flare out wider than the handlebars.   

 

http://www.ebay.com/...Id=320933640868






 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.