2006 yz450f clutch pressure plate screws



3 replies to this topic
  • 88motohead88

Posted February 22, 2014 - 06:52 AM

#1

Do you tighten the screws all the way and then torque them or torque them as you tighten them against the springs. Seems like they would fly loose if I dont but seems like way over 7-9 foot pounds to get the springs all the way in.

  • gimped up

Posted February 22, 2014 - 07:20 AM

#2

Do you tighten the screws all the way and then torque them or torque them as you tighten them against the springs. Seems like they would fly loose if I dont but seems like way over 7-9 foot pounds to get the springs all the way in.

Run them down snug but not tight, then torque them each twice. Don't exceed torque spec on bolts. If you do they will snap or strip.
Did you use blue loctite?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • 88motohead88

Posted February 22, 2014 - 07:55 AM

#3

I haven't put it back together yet cause I didn't know. I snapped one and it wasn't close to being all the way in. Hopefully the springs fine. I do have some and I will definitely use it now that u said to. So the springs pressure on the bolt and loctite will hold it I see

  • grayracer513

Posted February 22, 2014 - 08:23 AM

#4

Loc-Tite isn't necessary.





Related Content

Forums
Photo

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.