Will 08 YZ450F Graphics fit on my 08 WR450F


5 replies to this topic
  • JokerWR

Posted February 05, 2014 - 05:50 PM

#1

Thanks!



  • RockerYZWR

Posted February 06, 2014 - 06:23 AM

#2

Yes, but you'll have to do some trimming and heat gun work to make them fit in certain places. The front/rear fenders are no issue - perfect fit. I didn't use the fork guard graphics but they would have been fine. The tank shrouds require some work but still look good. The number plate and airbox graphics are much different and will need a lot of work; I ended up not using mine because it wouldn't have looked good. Bolt holes and overall shapes are different between the two.

Attached Thumbnails

  • 1391696542859.jpg


  • JokerWR

Posted February 06, 2014 - 07:07 AM

#3

Yes, but you'll have to do some trimming and heat gun work to make them fit in certain places. The front/rear fenders are no issue - perfect fit. I didn't use the fork guard graphics but they would have been fine. The tank shrouds require some work but still look good. The number plate and airbox graphics are much different and will need a lot of work; I ended up not using mine because it wouldn't have looked good. Bolt holes and overall shapes are different between the two.

 

Thanks ... I appreciate the reply ... I can't seem to find any decent graphics for the WR and the ones I have found are way overpriced about 3X that of the YZ.



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • D-rek07

Posted February 06, 2014 - 11:43 AM

#4

Thanks ... I appreciate the reply ... I can't seem to find any decent graphics for the WR and the ones I have found are way overpriced about 3X that of the YZ.

Have you checked out Decal Works. Their prices aren't that bad.



  • JokerWR

Posted February 06, 2014 - 03:49 PM

#5

Have you checked out Decal Works. Their prices aren't that bad

 

i just checked them out ... thanks but not really diggin them either and you can get a yz kit for 1/2 that on ebay too ... $170 for some stickers just seams kinda crazy to me



  • RockerYZWR

Posted February 06, 2014 - 04:05 PM

#6

Which is why I went with the $60 YZ graphics and made them work. Plus, I was intent on red, black, and white graphics and couldn't find any WR-specific ones. That said, the job would be a lot easier if everything just fit and all you had to worry about was squeezing out the bubbles.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.