brp offset triple clamps



No replies to this topic
  • mtrablue

Posted January 09, 2004 - 09:37 AM

#1

i've been planning my winter projects for the wr. i have seen a write up on a set of 22mm offset triple clamps from BRP. i came from riding a cr250 based cre and i would love to tighten up the steering on the big wr.

i have raised the forks in the stock clamp. i also put a 51 tooth sprocket on to pull the rear wheel up in the swingarm. both were big improvements but i think it can be better.

have any of the tt gang tried these clamps?




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.