GYTR rear disc guard and lower chain guide

No replies to this topic
  • foggy3061

Posted January 23, 2014 - 02:15 AM


Just wondered if anyone else out there has tried these yet? GYTR Ultra High Molecular Weight Polyethylene, direct replacement for the original rear disc guard and lower chain guide.



After splitting a few of the original rear disc guards (once bending a rear disc too) and distorting a few lower chain guides, I took the plunge and bought one of each.


My last original chain guide - in relatively good order compared to some i've removed!




The original disc guard - hadn't been on long either.




New disc guard




New lower chain guide




So far only the chain guide has taken a knock, but as you can see it has shrugged it off pretty well and is still perfectly aligned (the original aluminium one would be bent against the rear sprocket with that sort of impact!).




So far, so good!


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.