650R swingarm tool



No replies to this topic
  • BrianVT

Posted January 07, 2004 - 03:20 PM

#1

I was gonna try to make the swingarm preload tool described at The Pig Pen. A friend at my local bike shop lent me a clutch tool he has for some Honda street bike clutches. It's like a double-ended 1/2" drive socket. The larger end fits the outer ring perfectly. The smaller end is almost too large (diam.) for the inner ring but since it's only torqued 5 lbs. it works.
The #s engraved on the tool are KS #C 26x30 07716-0020203.
He said they're $28.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.