Think I got the jetting worked out !!!

No replies to this topic

Posted January 02, 2002 - 02:38 PM


It has been butt cold here on the east coast the last couple weeks, and the 426 was running like crap. It was fouling plugs, it wouldn't idle, it was hard to start, and it just felt funny.

If you read my previous post, you will remember that all this time I've been running #9 plugs without realizing it.

Well this past weekend I did a few modifications that seem to have done wonders.

BK mod (about a .5 sec. squirt), 168 main, 45 pilot, clip in 5th position, and back to a CR8E plug.

Went out today (about 28 degrees / sea level)
started 1st kick with the choak, idled perfectly, and felt STRONG. I'm still going to fool with the fuel screw a little (it's in the stock position), but it ran GREAT. Rode for about 10 minutes, shut it off, it sat for about 20 minutes in the cold and started right up again.

I'm really happy about this, I can't wait to hit Tower City this Saturday if it doesn't snow.

Thanks to all of you for your help and advice, it's great to have my baby back !!! :)

Related Content

WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Yamaha YZ450F 2017 by Chris.GVS

Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017

BIGBORE FOR YZ450F 2006? by Taattie94

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies

James Stewart back on a YZ450F by YamaLink

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  30 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.