flywheel problems

3 replies to this topic
  • roysicotte

Posted January 07, 2014 - 11:37 AM


I had just replaced my timing chain. set my timing right, put it back together and I didn't have spark, which I did prior to the new timing chain. I pulled my flywheel back off and noticed there are 2 pretty good gouges in the inside part which is the magnet. can those gouges stop me from getting spark. these are not scratches in the mag. I looks like someone at one time stuck something in the 2 holes on the flywheel and tried to pry it off. the stator itself looks good. no damage.  thanks


  • grayracer513

Posted January 07, 2014 - 11:38 AM


What year/model, please?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • roysicotte

Posted January 07, 2014 - 12:15 PM


2005 Yamaha yz 450f

  • grayracer513

Posted January 07, 2014 - 01:15 PM


Thinking of the flywheel as a disc with a cylindrical ring on it that houses magnets, the gouges are on the disc surface, or on the interior surface of the ring, scarring the magnets?


No marks of any sort on the stator?

Related Content


yz400f throttle bog by yz400fmaniac

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • * * * * *
  • Hot  28 replies

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  57 replies

Is the 2016 GYTR Yamaha YZ450F too fast? by Fryboy

Dirt Bike   Special Interest Forums   Pro Racing
  • * - - - -
  • Hot  241 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.