will wr450f 2012+ front and rear fender fit a wr450f 2007 model?


6 replies to this topic
  • KuilaWR450f

Posted December 02, 2013 - 10:17 PM

#1

will wr450f 2012+  front and rear fender fit a wr450f 2007 model?



  • 080

Posted December 03, 2013 - 10:02 AM

#2

will wr450f 2012+  front and rear fender fit a wr450f 2007 model?

 

The front will but because of the frame/subframe difference on the newer model the rear fender most likely won't.



  • JDLowrance

Posted December 03, 2013 - 12:01 PM

#3

The front will but because of the frame/subframe difference on the newer model the rear fender most likely won't.

The rear is the exact same fender.

 

The front will require some drilling....ping Krannie for details.



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Krannie McKranface

Posted December 03, 2013 - 03:39 PM

#4

Yeah, the newer rear fender has a different part number, but it lines right up.

The front requires relocating two holes and some small spacers under the fender. No big-a-deal.



  • 080

Posted December 04, 2013 - 10:01 AM

#5

The rear is the exact same fender.

 

The front will require some drilling....ping Krannie for details.

 

My bad, sorry.



  • Parx_400

Posted December 04, 2013 - 11:03 AM

#6

You can buy a 2012 style front with the pre 2012 holes. I have a white one. 



  • RockerYZWR

Posted December 12, 2013 - 11:31 PM

#7

Yeah, the newer rear fender has a different part number, but it lines right up.

The front requires relocating two holes and some small spacers under the fender. No big-a-deal.

Disregard my question in the other post...

If you got it to work with just relocating two of the holes, cool, but by my measurements, both front and rear on the 2012+ were too wide (fronts are wider), and are too far apart front to back.  The Acerbis fender I got would require four diagonal cuts - I just decided to can the idea and stick with 2011.  It is cheap enough, however at about $20 that I may just save the return shipping cost and give it a shot.  

 

You can buy a 2012 style front with the pre 2012 holes. I have a white one. 

 Where from and made by who?






 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.