Led indicator flasher unitYamaha WR400F 2000
Posted October 25, 2013 - 06:37 AM
I have put LED indicators on. I went to my local yamaha dealer and bought a led flasher relay.
Problem is the standard 1 is for 3 wires & the 1 I was sold only has 2 wires.
Can any1 tell me how to wire the new flasher in plz.
Posted October 26, 2013 - 04:13 PM
Don't have it anymore do can't tell you exactly.
Just experiment. Not many combinations !
Posted October 26, 2013 - 06:55 PM
the 3 terminal will work on a 2 wire by not using 1 connection
but i don't see how a 2 terminal will work on a 3 wire without flashing all the lights
Posted October 26, 2013 - 07:17 PM
A three terminal one hooks up to ground, 12V positive and the turn signal switch. I think the 2 wire one doesn't need to be grounded.
Edited by funt, October 26, 2013 - 07:23 PM.
Posted October 26, 2013 - 07:31 PM
here is how my xl is set up with a two terminal i can't find a good 3 terminal chart ?
Edited by Zimman, October 26, 2013 - 07:43 PM.